• Recirculating: No
  • Overflow Tank Materia: Aluminum
  • Overflow Tank Finish: Natural
  • Shape: Rectangular
  • Capacity: 1.5 pints
This transmission expansion tank features a petcock for draining excess fluid, a sintered bronze vent, and mounting flanges for easy panel mounting. It has a 1.5 pint capacity to meet NHRA & IHRA overflow requirements and is constructed from .100 aluminum. The tank size is 3-1/2" wide by 5-1/4" ...
Part No: CAN45-000
  • Rear Main Seal Style: N/A
  • Sump Style: Wet
  • Stroker Clearanced: Yes
  • Maximum Stroke with OE Rod: 4.500 in.
  • Dipstick Provision: Yes
This road race pan is for Pontiac 301-455 engines and fits all G.T.O'?s and ?1967-19?69 Firebirds. It has an 8" deep, 8" long sump for a 6 quart system capacity. This pan requires our 15-401 pickup. Recommended Accessories 15-401 - Pickup with 3/4" Inlet for M-54DS or M-10541 Oil Pumps 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. ...
  • Rear Main Seal Style: 1-piece
  • Sump Style: Wet
  • Stroker Clearanced: Yes
  • Maximum Stroke with OE Rod: 3.400 in.
  • Dipstick Provision: Yes
This "T" style rear sump oil pan is for Ford 289-302 blocks in Fox Body Mustangs. It has a 7-1/2" deep by 8" long by 13-1/2" wide sump and a 7 quart system capacity. This pan can be used with a stock rear sump Mustang/T-Bird pickups OR our replacement pickup #15-641. Some long tube headers require modification. ...
  • Oil Pan Style: Street/Strip
  • Oil Pan Depth (in.): 7.500 in.
  • Pickup Installation: Bolt-in
  • Tube Diameter (in.): 0.625 in.
  • Quantity: Sold individually.
Pickup for SBF Street Strip 15-640 Oil Pan with a M-68 Standard Volume Oil Pump or M-68HV High Volume Oil Pump or M-10688 High Performance High Volume Oil Pump. ...
Part No: CAN15-641
  • Rear Main Seal Style: 1-piece
  • Sump Style: Wet
  • Stroker Clearanced: Yes
  • Maximum Stroke with OE Rod: 3.400 in.
  • Dipstick Provision: Yes
This "T" style rear sump oil pan is for Ford 289-302 blocks with main supports in Fox Body Mustangs. It has a 7-1/2" deep by 8" long by 13-1/2" wide sump and a 7 quart system capacity. Crank scraper omitted to allow for clearance for most main supports. This pan requires a 15-647 pickup for use with Canton #21-060 main support. Some long tube headers require modification. ...
  • Oil Pan Style: Road race
  • Oil Pan Depth (in.): 7.500 in.
  • Pickup Installation: Bolt-in
  • Tube Diameter (in.): 0.750 in.
  • Quantity: Sold individually.
302 Pickup for Road Race 15-644S Oil Pan with Canton Racing Steel Main Support with a M-68 Standard Volume Oil Pump or M-68HV High Volume Oil Pump or M-10688 High Performance High Volume Oil Pump. ...
Part No: CAN15-647
  • Locking: No
  • Dipstick Entry: N/A
  • Dipstick Handle Material: Steel
  • Dipstick Handle Finish: Natural
  • Dipstick Tube Included: Yes
This Universal steel tube dipstick kit is designed for our pans which have a pan mounted dipstick provision built into them. The dipstick needs to be calibrated for each application and can be bent to fit if necessary. Dipstick installs into 1/4" NPT female dipstick bung. Diameter is 1/2". ...
Part No: CAN20-850
  • Locking: No
  • Dipstick Entry: Oil pan
  • Dipstick Ebtry Type: 1/4 in. NPT
  • Dipstick Handle Material: Aluminum
  • Dipstick Handle Finish: Natural
This Universal steel braided dipstick kit is designed for our pans which have a 1/4" N.P.T. pan mounted dipstick provision built into them. The dipstick features a stainless steel braided dipstick tube, mounting bracket, and chrome dipstick head and fittings. Dipstick needs to be calibrated for each application and can be bent to fit if necessary. Be sure to check pan listing for proper dipstick ...
Part No: CAN20-854
  • Girdle Material: Steel
  • Girdle Finish: Black oxide
  • Hardware Included: Yes
  • Stroker Clearanced: Yes
  • Machine Work Required: Yes
Ford 289-302 Main Support. Machined to clear at least a 3.40" stroke. Will not work with stock pans. ...
Part No: CAN21-060
  • Fastener Style: Stud
  • Fastener Head Style: Standard hex
  • Fastener Head Style: Allen
  • Fastener Finish: Natural
  • Fastener Material: Stainless steel
This BBC, Pontiac, and SB & BB Mopar Oil Pan Stud Kit makes the installation of the oil pan easier. The studs hold the gasket in place while installing the pan and helps for pan alignment. Similar Products 88-300 - BBC Mark IV Oil Pan gasket Four Piece Design ...
Part No: CAN22-310
  • Fastener Style: Stud
  • Fastener Head Style: Allen/6-Point
  • Fastener Finish: Natural
  • Fastener Material: Stainless Steel
  • Washer Included: No
This Oil Pan Stud Kit is for Ford 302, 351W, 351C, 351M, 400M & 429-460 engines. It makes the installation of the oil pan easier. The studs hold the gasket in place while installing the pan and helps for pan alignment ...
Part No: CAN22-360
  • Fitting Angle: Straight
  • Fitting Size 1: 3/4-16 in. O-Ring
  • Fitting Attachment 1: Male threads
  • Head Style: Hex
  • Finish: Natural
Canton 23-450A 3/4-16 O-ring plug for Ford Water Necks ...
Part No: CAN23-450A
  • Water Neck Style: Straight
  • Swivel: No
  • Sealing Style: O-ring
  • Water Neck Material: Billet aluminum
  • Finish: Polished
These billet aluminum water necks are designed for 302-351W Ford engines. They feature a ?16 AN fitting, a connection for the stock heater hose line, and have all the necessary clearance for a thermostat. Includes stainless steel hardware.   Recommended Accessories 23-450A - 3/4-16 O-ring plug for Ford water ...
Part No: CAN80-036
  • Rear Main Seal Style: N/A
  • Sump Style: Wet
  • Stroker Clearanced: Yes
  • Maximum Stroke with OE Rod: 4.500 in.
  • Dipstick Provision: Yes
This high capacity pan is for Pontiac 301-455 engines and features a side pouch which offers increased oil capacity while still providing considerable x-member clearance. It has an 8" deep by 11-1/2" wide sump, with a 6-1/2 quart system capacity. This pan requires our 15-401 pickup. Recommended Accessories 15-401 - Pickup with 3/4" Inlet for M54DS or M10541 Oil Pump 20-850 - Universal Dipstick ...
Part No: CAN15-400
  • Oil Pan Style: Street/Strip
  • Pickup Installation: Press fit
  • Oil Pan Depth (in.): 8.000 in.
  • Tube Diameter (in.): 0.750 in.
  • Quantity: Sold individually.
Pontiac 301-455 Pickup for Street Strip 15-400 or Road Race 15-452 Oil Pan with a M-54DS High Pressure Oil Pump Recommended Accessories 20-918 - Pontiac 301-455 Screen Windage Tray 20-918P - Pontiac 301-455 Pro-Style Louvered Windage Tray 22-310 - Pontiac 301-455 Oil Pan Stud ...
Part No: CAN15-401
  • Windage Tray Style: Screened
  • Sump Location: Rear
  • Sump Style: Wet
  • Stroker Clearanced: No
  • Crank Scraper Included: No
The Pontiac Screen Windage Tray sandwiches between the block and the pan. Made to be used with the 301-455 blocks and aftermarket pans that are deeper in the front than OEM. The half-screen, half-solid design offers excellent oil control and horsepower savings. This full-length tray wraps around the oil pump and provides windage control for the entire rotating assembly. NOTE: On engines that ...
Part No: CAN20-918
  • Windage Tray Style: Louvered
  • Sump Location: Rear
  • Sump Style: Wet
  • Stroker Clearanced: No
  • Crank Scraper Included: No
The Pontiac Pro-Style Windage Tray sandwiches between the block and the pan. Made to be used with the 301-455 blocks and aftermarket pans that are deeper in the front than OEM. The solid louver design offers superior oil control and horsepower savings in high RPM applications. This full-length tray wraps around the oil pump and provides windage control for the entire rotating assembly. NOTE: ...
Part No: CAN20-918P