• Cam Style: Hydraulic flat tappet
  • Basic Operating RPM Range: 3,000-6,800
  • Intake Duration at 050 inch Lift: 235
  • Exhaust Duration at 050 inch Lift: 237
  • Duration at 050 inch Lift: 235 int./237 exh.
All Howards Cams use the highest-grade race quality cores available. All hydraulic and mechanical flat tappet camshafts are 100% Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. Howards Cams are manufactured on dedicated high precision CNC cam grinding machines. Most Howards Cams are packaged and shipped in their unique, hard, high impact ...
Part No: HRC112681-06
  • Cam Style: Hydraulic roller tappet
  • Basic Operating RPM Range: 2,000-6,000
  • Intake Duration at .050 inch Lift: 219
  • Exhaust Duration at .050 inch Lift: 225
  • Duration at 050 inch Lift: 219 int./225 exh.
Howards Cams hydraulic roller camshafts are offered in a wide variety of profiles, from mild to wild. These units are precision-ground from race-quality cores, in-house, on dedicated cam-grinding machines. Each Howards Cams hydraulic roller camshaft is manufactured to the highest quality standards. Order the model designed for your vehicle and engine application. ...
Part No: HRC221145-12
  • Number of Springs Per Valve: Single
  • Outside Diameter of Outer Spring (in): 1.250 in.
  • Coil Bind Height (in): 1.160 in.
  • Damper Spring Included: Yes
  • Spring Rate (lbs/in): 411 lbs./in.
Delivers increased valve train stability and performance over OEM springs. Premium chrome silicone, coiled and heat-treated in the finest facilities available. Designed for most performance hydraulic and mild mechanical flat tappet applications. Note: Some have taller installed heights and may require either longer valves or retainers design for greater installed height. Sets of 16. ...
Part No: HRC98214
  • Cam Style: Hydraulic roller tappet
  • Basic Operating RPM Range: 1,800-5,400
  • Intake Duration at .050 inch Lift: 225
  • Exhaust Duration at .050 inch Lift: 231
  • Duration at 050 inch Lift: 225 int./231 exh.
Howards Cams hydraulic roller camshafts are offered in a wide variety of profiles, from mild to wild. These units are precision-ground from race-quality cores, in-house, on dedicated cam-grinding machines. Each Howards Cams hydraulic roller camshaft is manufactured to the highest quality standards. Order the model designed for your vehicle and engine application. ...
Part No: HRC110245-12
  • Cam Style: Hydraulic flat tappet
  • Basic Operating RPM Range: 2,000-6,000
  • Intake Duration at 050 inch Lift: 224
  • Exhaust Duration at 050 inch Lift: 224
  • Duration at 050 inch Lift: 224 int./224 exh.
American Muscle Hydraulic and Mechanical Flat Tappet Camshafts Near duplicates of some of the most iconic original equipment camshaft grinds from the ‘60s to the early ‘70s. We took these fantastic grinds and made slight changes to the ramp speeds and minor duration changes to give you better reliability and horsepower. You still get the same throttle response and of course the original style ...
Part No: HRC117091-14
  • Lifter Style: Hydraulic flat tappet
  • Lifter Link Bars Included: No
  • Lifter Outside Diameter (in): 0.842 in.
  • Quantity: Sold as a set of 16.
  • Make: Chevrolet
Howards Cams hydraulic lifters are designed for maximum performance, offering precision oil control. Use as OE replacements as well as in high performance racing applications. Sets of 12 (6cyl.) or 16 (V8). ...
Part No: HRC91111
Howards Racing ComponentsHowards Racing Components
91774 AMC/Mopar V8 Maximum Effort Retro-Fit Hydraulic Roller Lifters, 0.903 in. OD, Link BarLifters, Hydraulic Roller, Vertical Link Bar, Chevy, Small Block, Set of 16
  • Lifter Style: Hydraulic roller
  • Lifter Link Bars Included: Yes
  • Link Bar: Vertical
  • Lifter Outside Diameter (in): 0.903 in.
  • Lifter Offset: None
These Lunati Street Performance retro-fit hydraulic roller lifters feature a captured link bar system to ensure precise lifter movement. They use modern cold-casting technology to reduce costs and offer outstanding performance and reliability without any break-in procedure concerns. These Lunati Street Performance retro-fit hydraulic roller lifters have been specifically designed for engines ...
Part No: HRC91774
  • Cam Style: Hydraulic flat tappet
  • Basic Operating RPM Range: 2,000-6,000
  • Intake Duration at 050 inch Lift: 224
  • Exhaust Duration at 050 inch Lift: 224
  • Duration at 050 inch Lift: 224 int./224 exh.
American Muscle Hydraulic and Mechanical Flat Tappet Camshafts Near duplicates of some of the most iconic original equipment camshaft grinds from the ‘60s to the early ‘70s. We took these fantastic grinds and made slight changes to the ramp speeds and minor duration changes to give you better reliability and horsepower. You still get the same throttle response and of course the original style ...
Part No: HRCCL117091-14
  • Cam Style: Hydraulic roller tappet
  • Basic Operating RPM Range: 2,200-6,400
  • Intake Duration at .050 inch Lift: 227
  • Exhaust Duration at .050 inch Lift: 233
  • Duration at 050 inch Lift: 227 int./233 exh.
Lift: .597 / .597, Duration @ .050: 227 / 233, Centerline: 108, Good idle, Good all around performance, Good vacuum, 9.5:1+ compression & 2500+ stall converter.   Notes: For OE Roller ...
Part No: HRCCL220525-12E