HomeRegister
QHow soon will this product ship?
A

We have five of these in stock and if you order by 2pm estern it will ship same day. If products is not in stock at the warehose they will generally ship within 48 hrs.

By Scott S on May 19, 2017. 
Was this review helpful to you? yes no
QHi can the big end distributor p/n BEP55001 be used on a tpi corvette engine or is this one for a non computer controlled setup? Thanks.
A

Sorry this distributor will not work with TPI. TPI requires a special computer controled distributor to fire the injectors. Also the BEP55001 is sold as a vacuum advance. You can purchase a 55092 to lock out the vacuum advance.

By Christopher T on June 30, 2017. 
Was this review helpful to you? yes no
QAre these pumps made by Holley?
A

As far as I know these pumps are supplied by Holley and rebrand with the Big End name. The Holley rebuild kit will work with these pumps.

By on August 01, 2017. 
Was this review helpful to you? yes no
QWhat's the waranty on these pumps?
A

One year manfacture waranty. If you have a issue with the pump you cab send back to me and I deal with the manufactue to get it replaced.

By on August 01, 2017. 
Was this review helpful to you? yes no
QWill these fit 5.3 vortec?
A

no. vortec have has different intake bolt holes. vortec have straight up and down intake bolt holes and older style have holes for intake that are at a 90 degree to the head.

By on September 20, 2017. 
Was this review helpful to you? yes no
QPart QA1-GS507-09450D. The spring is rated at 450 lb. Can I order the 350 lb spring on the coil over kit?
A

Not at this time. QA1 only makes a 450lbs, 550lbs and 650lbs at this time for that combination.

By Daniel T on November 13, 2018. 
Was this review helpful to you? yes no
QCan QA1 GS507-09550D Coil over shock be purchase separate and the spring separate in order to get the shock with the 350 lb spring?
A

Not at this time. QA1 only makes a 450lbs, 550lbs and 650lbs at this time for that combination.

By Daniel T on November 13, 2018. 
Was this review helpful to you? yes no
QDoes it have warranty?
A

Yes the LS drive by wire from Top Street Performance come with a 1 year manufactures waranty.

By Warren B M on August 03, 2019. 
Was this review helpful to you? yes no
QWill this rear sway bar fit a 85 S10 with a Ford 8.8 rear? Thanks
A

Yes this would work. The Anti-roll Bar is pretty universal. You may run into a problem if the rear housing or/and frame rails have been narrowed.

By Robert A on September 04, 2019. 
Was this review helpful to you? yes no
QWhich o-ring for this pan? Black or Green?
A

The GM black o-ring is what you want to use. We have these in-stock as the TSP 81006 gasket or GM Performance 12612350 .

By Phillip S on September 05, 2019. 
Was this review helpful to you? yes no
QWith this kit is it mandatory to cut the windage tray?
A

Yes you must cut the windage tray

By Justin E on September 07, 2019. 
Was this review helpful to you? yes no
QAre these forged or cast spindles? The Allstar website says cast, but yours say forged?https://allstarperformance.com/2in-dropped-spindles-mustang-ii-all56305/
A

Looks like all the information on them shows to be cast. The information was provided from Allstar originally. I'll update the listing right away. Looks like the only Mustang II spindle that Allstar offers in a forged is the 3-Peice, but's a not avalible in a drop spindle.

By Chris S on October 17, 2019. 
Was this review helpful to you? yes no
QWill this radiator fit a small block mopar with upper driver side inlet / lower passenger side outlet? Thank you
A

It does have a driver side inlet and the lowere is located on the passenger side. You can also find this information in the specifications

By Guillermo T on October 30, 2019. 
Was this review helpful to you? yes no
QGood day. I would like to know if part number BEP60522 has an overall size of 28x19 (core size 24x18), or if the core size is 28x19. Also, I would like to know if the inlet location is Upper Driver Side with oulet being lower driver side. Thank you for you answer
A

Is is 28 in. wide and 19 in. heigh. over all. The core is 24 in. wide and 18.75 in. tall. The upper is on the driver side. The lower is on the passenger side.

By Guillermo T on November 04, 2019. 
Was this review helpful to you? yes no
QCan this be drilled and tapped for a vacuum port for a brake booster?
A

I wouldn't. It's plastic

By Daniel R on January 09, 2020. 
Was this review helpful to you? yes no
QSo I got your oil pan but there is no holds for the lower AC bracket. On the stock oil pan there is two mounting holes for the lower part of the AC bracket. do you make a bracket for that? This is the pan I got TSP 81074 Retro-Fit LSX Aluminum Rear Sump Oil Pan, Aluminum, Natural
A

I don't, Holley makes one. Part Number is 20-160. It looks like there are three different brakets depending on what your motor came out of. Corvette G8, 1998-02 Camaro/Firebird/GTO and 2010-15 Camaro/Truck. The Holley bracket looks like it only fits one applicatiuon.

By Justin S on January 19, 2020. 
Was this review helpful to you? yes no