Edelbrock part 7167 Performer RPM Camshaft is designed for Ford 429-460 V-8 applications. This Edelbrock cam kit produced 506 HP & 536 ft-lbs. of torque when used with 7166 intake and 60669 cylinder heads on a 460 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.
- Cam Style:
- Hydraulic flat tappet
- Basic Operating RPM Range:
- 1,500-6,500
- Intake Duration at .050 inch Lift:
- 234
- Exhaust Duration at .050 inch Lift:
- 244
- Duration at .050 inch Lift:
- 234 int./244 exh.
- Advertised Intake Duration:
- 290
- Advertised Exhaust Duration:
- 300
- Advertised Duration:
- 290 int./300 exh.
- Intake Valve Lift with Factory Rocker Arm Ratio:
- 0.556 in.
- Exhaust Valve Lift with Factory Rocker Arm Ratio:
- 0.581 in.
- Valve Lift with Factory Rocker Arm Ratio:
- 0.556 int./0.581 exh.
- Lobe Separation (degrees):
- 108
- Computer-Controlled Compatible:
- No
- Camshaft Gear Attachment:
- 1-bolt
- Valve Springs Required:
- Yes
- Lifters Included:
- Yes
- Valve Springs Included:
- No
- Retainers Included:
- No
- Locks Included:
- No
- Valve Stem Seals Included:
- No
- Timing Chain and Gears Included:
- No
- Assembly Lubricant Included:
- Yes
- Pushrods Included:
- No
- Rocker Arms Included:
- No
- Gaskets Included:
- No
- Quantity:
- Sold as a kit.
- Make:
- Ford
- Engine Family:
- Ford big block 385 Series
- Engine Sizes:
- 7.0L/429-7.5L/460
- Years:
- 1968-1997
