Floo Tek offers one of the most affordable ways to add a set of aluminum cylinder heads to your Small Block Ford. These cylinder heads have a 180cc intake runner and 62cc exhaust runner, so they are great for street and off-road application were you would like to have good low in power. The 58cc cumbustion chamber, 1.94 inch intake and 1.54 inch exhaust valves make them a great cylinder head for most stock applications. The Hi performance springs can be used on hydraulic roller cams up to .550 inches of lift. These Flo-Tek cylinder heads even come with a five angle valve job, you don't see that on most more expensive cylider heads. These heads are complete and ready to run. Sold individually.
- Cylinder Head Style:
- Assembled
- Cylinder Head Material:
- Cast aluminum
- Cylinder Head Finish:
- Natural
- CNC-Machined Combustion Chamber:
- No
- Combustion Chamber Volume (cc):
- 58cc
- Combustion Chamber Style:
- Heart
- CNC-Machined Intake Runner:
- No
- Intake Runner Volume (cc):
- 180cc
- Intake Port Shape:
- Rectangular
- Intake Port Location:
- Standard
- Intake Valve Angle:
- 18 degree
- CNC-Machined Exhaust Runner:
- No
- Exhaust Runner Volume (cc):
- 62cc
- Exhaust Port Shape:
- Square
- Exhaust Port Location:
- Standard
- Exhaust Valve Angle:
- 18 degree
- Intake Valves Included:
- Yes
- Intake Valve Diameter (in.):
- 1.940 in.
- Exhaust Valves Included:
- Yes
- Exhaust Valve Diameter (in.):
- 1.550 in.
- Valve Type:
- Stainless, Swirl-Polished
- Maximum Valve Lift (in.):
- 0.550 in.
- Valve Springs Included:
- Yes
- Valve Spring Type:
- Single w/Damper
- Outside Diameter of Outer Spring (in.):
- 1.460 in.
- Valve Guides Included:
- Yes
- Valve Guide Material:
- Manganese bronze
- Valve Seats Machined:
- Yes
- Valve Seat Material:
- Powdered metal
- Valve Seat Machine Style:
- 3-angle
- Retainers Included:
- Yes
- Retainer Material:
- 7 Degree chromoly
- Valve Stem Seals Included:
- Yes
- Valve Stem Seal Style:
- Viton Positive stop
- Locks Included:
- Yes
- Lock Style:
- 7 degree chromoly
- Camshaft Style:
- Hydraulic flat tappet
- Spark Plug Style:
- Angled
- Guideplates Included:
- Yes
- Guideplate Pushrod Size:
- 5/16 in.
- Rocker Arm Studs Included:
- Yes
- Rocker Arm Nut Thread Size:
- 3/8-24 in.
- Accessory Bolt Holes Drilled:
- Yes
- Valve Cover Mounting Style:
- Perimeter bolt
- Heat Crossover:
- Yes
- Steam Holes Drilled:
- No
- Oiling Style:
- Through pushrod
- Machined for O-Ring:
- No
- Quantity:
- Sold individually.
- Notes:
- Designed for flat tappet cams. Head does not include thermactor plugs (EGR). Will not accept stock pushrods. Valve Spring Pressure, 290 lbs open, 120 lbs closed. Spark Plug Type 14mm Spark Plug, .750 Reach
- Make:
- Ford
- Engine Family:
- Ford small block Windsor
- Engine Sizes:
- 4.7L/289-5.8L/351
- Years:
- 1963-1995