$$367.95Engine \ Oil Pans \ Chevy Small Block302-3
HOL302-3
Holley 302-3 LS Retro-Fit Aluminum Rear Sump Oil Pan, Aluminum, Natural, Oil Drains
Designed for LS engine retrofit installations in GM muscle/classic car and truck chassis requiring more oil pan to chassis clearance around the front half of the oil pan Perfect for: 1967-69 Camaro/Firebird, 1968-74 Nova/Apollo/Ventura/Omega, 1982-92 F-body, 1978-87 G-body, and 1964-72 A-body applications. Also 1979-2004 Mustang and 1979-1986 ...
HolleyHolley 302-3 LS Retro-Fit Aluminum Rear Sump Oil P

Holley

Holley 302-3 LS Retro-Fit Aluminum Rear Sump Oil Pan, Aluminum, Natural, Oil Drains

Item #: HOL302-3

Mfg Part #: 302-3

UPC #: 090127018521

Applies To Continental U.S. orders only

Specifications
Pan Specifications
Rear Main Seal Style
1-piece
Stroker Clearanced
No
Maximum Stroke with OE Rod
4.000 in.
Dipstick Provision
No
Dipstick Included
No
Sump Location
Rear
Sump Style
Wet
Oil Pan Capacity
5.90 quarts
Oil Pan Depth (in)
5.463 in.
Oil Pan Material
Aluminum
Oil Pan Finish
Natural
Baffled
Yes
Kicked Out
No
Windage Tray Included
No
Pickup Included
Yes
Oil Pump Included
No
Oil Pump Driveshaft Included
No
Crank Scraper Included
No
Gaskets Included
Yes
Hardware Included
Yes
Quantity
Sold as a Kit
Applications
Make
Chevrolet
Engine Family
Gen III/IV (LS-based engines)
Engine Size
4.8L/294-6.2L/376
Years
1964-1992
General
Brand
Holley
Item #
HOL302-3
Mfg Part #
302-3
UPC
090127018521
Description

Designed for LS engine retrofit installations in GM muscle/classic car and truck chassis requiring more oil pan to chassis clearance around the front half of the oil pan

Perfect for: 1967-69 Camaro/Firebird, 1968-74 Nova/Apollo/Ventura/Omega, 1982-92 F-body, 1978-87 G-body, and 1964-72 A-body applications. Also 1979-2004 Mustang and 1979-1986 Capri Fox bodies

Holley engineering has taken their LS Retro-fit oil pans to the next level! The 302-3 design has even more sump clearance, includes two 1/2" NPT oil return bosses, and can clear a 4.00" stroke crankshaft. Just like the 302-2, the new designed 302-3 will fit the 1955-87 GM Muscle Cars and Trucks that need a little more clearance in the front of the oil pan. However, the new design will also fit the Ford Fox body OEM K-member and was designed to clear the Fox Body rack and pinion too. It's a win-win for more LS conversions.

Maximum crankshaft stroke = 4.00"
Sump Oil Capacity - 5.6 Quarts
Total Oil Capacity with stock oil filter - 6.1 Quarts
Oil Filter (AC Delco® PF48 or PF48E, Mobile M1-113, Wix 57060, K&N HP-1017, or equivalent)
Requires use of Holley 302-15 Dipstick and Tube Kit or LS3 dipstick (GM P/N 12669528) and tube (GM P/N 12625031)

*Engine location may need to be adjusted (up / down or fore / aft) for cross member or steering linkage clearance depending on the vehicle, steering configuration and chassis type.

ATTENTION! 302-3 is designed to use a GM "F-body" windage tray, GM P/N 12558253. A modification to the windage tray is required to provide clearance to the pick-up tube. A full-length windage tray may be used if the front quarter of the tray is removed. See the instruction sheets showing the windage tray modifications and overall length required.

ATTENTION!
Additional Parts Needed (Oil Pan Gasket 6665G or GM® 12612350, High Quality RTV sealer, Oil Filter -AC Delco® PF48 or equivalent)

  • Profile of the sump has been revised to provide extra chassis and steering rack clearance
  • NOTE – Oil pan #302-3 will clear a 4.00” stroke crankshaft.
  • Includes two ½-14” NPT oil return ports to provide a convenient oil return for turbochargers. (one port on each side)
  • Provides OEM fitment - OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity and OEM bell-housing attachments
  • Traditional high-quality cast aluminum appearance with clean exterior styling
  • Provides maximum clearance for vehicles where the steering linkage is behind the engine cross member
  • Complete kit includes sump baffle, OE style pick-up tube, sump plug, oil filter stud, oil passage cover, etc.
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question

TEASoftware