LS Truck Billet Alternator Bracket is compatible with: truck/SUV (or LS3/L99 Camaro) crank pulley (ICT# BAL300).
The package includes: front & rear bracket, idler pulley, and mounting hardware.
Features
Alternator: (ICT# ALT300)(will not fit Corvette/CTSV or 2010 up Camaro large bolt pattern alternators), will fit any other LS powered vehicle alternators with any amperage. 145+ amp alternators do not have the provision for the rear bracket. If needing to extend your alternator harness connection, use ICT# WEALT30-36 (4-pin) or WEALT40-36 (2-pin) Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum Belt Length (550K6) May require slight grinding on block (see photos) if using a 105 amp alternator (145/160 amp alternators are a direct fit) This can only be used on blocks with at least 2 mounting holes on the front of the block. Blocks that only have 1 mounting hole will require drill template 551445 to drill and tap the 2nd M10-1.5mm hole. This hole is in a non-critical part of the block that is away from the cylinder, oil, and water jackets. This bracket only bolts to the front face of
The package includes: front & rear bracket, idler pulley, and mounting hardware.
Features
- Alternator Mounting Position:
- Driver side lower mount
- Alternator Bracket Type:
- Upper and lower brackets
- Alternator Lower Bracket Mounting Style:
- Engine block front mount
- Alternator Style:
- N/A
- Water Pump Style:
- Short
- Bracket Finish:
- Natural
- Bracket Material:
- Billet aluminum
- Hardware Included:
- Yes
- Belt Style:
- Serpentine
- Quantity:
- Sold as a kit.
- Notes:
- Includes idler pulley and rear support bracket. Truck blocks require second hole to be drilled. Requires 6-rib, 79 in. belt. Does not fit Corvette alternators. Must use truck/SUV/LS3 Camaro crank pulley.
- Make:
- Chevrolet
- Engine Family:
- Chevy small block Gen III/IV (LS-based engines)
- Engine Sizes:
- 4.8L/294-7.0L/427
- Years:
- 1997-2015
