Don't let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps of current and maximum voltage output of 40,000 volts! Note: If installing the Blaster SS Coil to a points distributor or a non-current limiting ignition system without an MSD Ignition, a 0.8 ohm ballast resistor is required (MSD PN 8214). The resistor should wire in series along with any factory resistors on the positive coil wire.
Features
Improved output coil for electronic ignitions, and MSD Ignitions Efficient winding design and assembly creates a compact housing Primary and secondary windings are encased in Ciba polyurethane 70:1 turns ratio and lower primary resistance produce high voltage output Tough, rigid housing with a tall tower and brass primary terminals
Features
- Coil Wire Attachment:
- Male/HEI
- Coil Style:
- E-core
- Primary Resistance:
- 0.355 ohms
- Internal Construction:
- Epoxy
- Finish:
- Red
- Maximum Voltage:
- 40,000 V
- Turns Ratio:
- 70:1
- Secondary Resistance:
- 4.40K ohms
- Inductance:
- 6.9 mH
- Peak Current:
- 300 mA
- Spark Duration:
- 200 uS
- Mounting Bracket Included:
- No
- Coil Wire Included:
- No
- Ballast Resistor Included:
- No
- Coil Shape:
- Square
- Diameter (in.):
- N/A
- Height (in.):
- 2.650 in.
- Quantity:
- Sold individually.
- Universal:
- Yes
