An improved combustion chamber design rotates the valves over the center of the cylinder bores for optimum valve angles, locations, and chamber shape. Choose from aluminum heads with as-cast 170cc or fully CNC-machined 190cc intake runners. Sold per pair completely assembled with stainless valves and high-performance valve springs. Heads listed are set up for use with hydraulic roller camshafts.
Notes: Street ported fully CNC, non-emissions head. For customers with blocks that are machined for 7/16 in. head bolts, the use of TSF-51400419 head bolt bushings is required. Set-up for hydraulic roller cam shaft only.
Features
- Cylinder Head Style:
- Assembled
- Cylinder Head Material:
- Cast aluminum
- Cylinder Head Finish:
- Natural
- CNC-Machined Combustion Chamber:
- Yes
- Combustion Chamber Volume (cc):
- 56cc
- Combustion Chamber Style:
- Twisted Wedge
- CNC-Machined Intake Runner:
- Yes
- Intake Runner Volume (cc):
- 190cc
- Intake Port Shape:
- Rectangular
- Intake Port Location:
- Standard
- Intake Valve Angle:
- 11 degree
- CNC-Machined Exhaust Runner:
- Yes
- Exhaust Runner Volume (cc):
- 66cc
- Exhaust Port Shape:
- Square
- Exhaust Port Location:
- Standard
- Exhaust Valve Angle:
- 13 degree
- Intake Valves Included:
- Yes
- Intake Valve Diameter (in.):
- 2.055 in.
- Exhaust Valves Included:
- Yes
- Exhaust Valve Diameter (in.):
- 1.600 in.
- Valve Type:
- Stainless, Swirl-Polished
- Maximum Valve Lift (in.):
- 0.600 in.
- Valve Springs Included:
- Yes
- Valve Spring Type:
- Dual W/Damper
- Outside Diameter of Outer Spring (in.):
- 1.295 in.
- Valve Guides Included:
- Yes
- Valve Guide Material:
- Bronze
- Valve Seats Machined:
- Yes
- Valve Seat Material:
- Ductile Iron
- Valve Seat Machine Style:
- 3-angle
- Retainers Included:
- Yes
- Retainer Material:
- Chromoly
- Valve Stem Seals Included:
- Yes
- Valve Stem Seal Style:
- N/A
- Locks Included:
- Yes
- Lock Style:
- 7 degree
- Camshaft Style:
- Hydraulic roller
- Spark Plug Style:
- Angled
- Guideplates Included:
- Yes
- Guideplate Pushrod Size:
- 5/16 in.
- Rocker Arm Studs Included:
- Yes
- Rocker Arm Nut Thread Size:
- 7/16-20 in.
- Accessory Bolt Holes Drilled:
- Yes
- Valve Cover Mounting Style:
- Perimeter bolt
- Heat Crossover:
- No
- Steam Holes Drilled:
- No
- Oiling Style:
- Through pushrod
- Machined for O-Ring:
- No
- Quantity:
- Sold individually.
- Notes:
- Street ported fully CNC, non-emissions head. For customers with blocks that are machined for 7/16 in. head bolts, the use of TFS-51400419 head bolt bushings is required. Set-up for hydraulic roller cam shaft only. Spark Plug Type 14mm Spark Plug, .75
- Make:
- Ford
- Engine Family:
- Ford small block Windsor
- Engine Sizes:
- 4.7L/289-5.8L/351
- Years:
- 1963-2001
