TRZ 400-5-MM 1997-2012 C5-C6 Corvette Outlaw K-Member Kit, W/ Rack and Motor Mounts

TRZ Motorsports 1997-2011 C5-C6 K-Member Kits are designed to replace the stock k-member and a-arms. Made to utilize a coil-over shock. This is a light weight kit designed for drag racing applications. These kits can reduce the front end weight of a 1997-2011 C5-C6 Corvette up to 70lbs. Track width is narrowed approximately 1 inch per side. Kits have 8 degrees positive caster built-in. All Rod-Ends are Chrome-Moly.

All kits include, One Chromoly K-Member, one sets of chromoly rod end upper and lower a-arms (one drivers side, one passenger side), One set of chromolly drop spindles (Spindle Mount)(will NOT accept a factory type C5 / C6 front brakes), one set of billet aluminum steering arms. Custom length manual rack and pinion with mounts welded to the K-member. Motor Mount pads, NOT the Motor Mounts themselves, just the location for them to sit on. Not designed for power steering. Can be ordered without rack and rack mounts if you want to do a custom rack.

Features:

• Custom Length Manual Rack and Pinion
• 6061 LH & RH Tie Rod Adjusters / Bump Steer Kit
• Steering Shaft, (2) Chrome-Moly U-Joints, and steering column adapter
• Designed to Replace Stock K-Member and A-Arms and Utilize a Coil-Over Shock
• Designed for Drag Race Applications ONLY
• Reduces Weight by up to 95 lbs
• Narrows Track Width Approximately 1″ per side
• Built-in 8 to 10 Degrees of Positive Caster
• Premium Teflon Lined Chrome-Moly Rod-Ends and Chrome-Moly Tubing Used Throughout.
• Depending on ride height, it uses a 4″ or 5″ stroke coil-over shock (lower shock mounts need to be 1″ wide x 1/2″ ID bearing style)
• Spindle Design can utilize a Strange Standard 5-lug 5 x 4.75 Hub Strange B4154WC or with a Spindle Mount Wheel Strange B4597WC. See related products
• Strange caliper brackets require some grinding to clear these spindles
• Comes with Optional Motor Mount Pads - This is NOT the Motor Mounts themselves, just the location for them to sit on) See related products
• This kit will NOT accept stock C5 / C6 Upper and Lower A-arms, brakes, or steering
• IF YOU HAVE A BRAKE KIT THAT FITS YOUR STOCK C5 / C6 SPINDLES… IT WILL NOT FIT TRZ SPINDLE FOR THIS KIT!